end mill with advanced ceramics level ensures higher productivity

When you run faster than the current parameters, check the maximum rotation limit for g-code.
HG1 can provide significant productivity differences, especially when running a part of 20 or larger diameter.
Super alloy super high speed finishing
HG2
characteristic
High-speed completion of rotation can be done at 800SFM or higher
Compared with CDBN cutter, advanced wear resistance
Better than CDBN or carbides
Upper surface paint film and CBNs and coating carbides
Tips for HG2
HG2 works well on Inconel 7318 and Inconel 6325.
The e02 mill is the first piece of advice.
And the larger the radius
When you run faster than the current parameters, check the maximum rotation limit for g-code per end mill.
AHQ’sĀ advanced ceramics level ensures higher productivity for users. All grades show excellent high temperature hardness, heat resistance and chemical stability. AHQ provides various types of ceramic tool materials (silicon nitride, aluminum base and whisker) to meet customer needs.
High resistance to oxidation and adhesion. The ceramic utilizes thermochemical stable alumina. The ceramic is best suited for high speed cutting applications where the cutting temperature is high and there is no coolant.
Alumina ceramics based on high pure aluminum enhanced hard alloy ceramics. The result of this process is that ceramic materials perform well under wet or dry cutting conditions. As an additional advantage, hardness and toughness have been improved to enable some of the interrupted cutting to be processed. This ceramic material has high thermal hardness and low plasticity. It needs to be cut and hardened.
The H2
characteristic from graphite-end-mill.com:
The equilibrium content of aluminum oxide and titanium carbide (Al2O3+TiC) under pressure
Stable performance under extensive machining conditions
Universal ceramics works well in a wide range of cutting applications
H5
characteristic
Applied to grinding roller hard turning application
Excellent toughness and wear resistance
edit
characteristic of end mill
Designed for ductile iron or nodular cast iron
Ceramic ceramics with high cutting speed to improve wear resistance
H7
characteristic
Tin – plated high-grade ceramic grade and all NTK ceramics grade the best grain
Best used for hard applications (HRC 55-70)
The gold coating makes edge wear easy to detect.
H8
characteristic
Excellent abrasion resistance, in a wide range of applications, such as carburizing or induction hardening steel (HRC 30-62)
The high quality surface is inserted with a wiper face
Tin coating ZC7 is available in various geometric shapes

Stretch wrapper manufacturer

Chinese horizontal orbital stretch wrapper providing door wrapping machine, aluminum orbital wrapping machine, spiral wrapping machine per your packaging requirement.